Section 1
Bid, ask and the gap between them
Every currency pair is shown with two prices. The bid is the price at which you can sell the base currency right now. The ask, sometimes called the offer, is the price at which you can buy it. The ask is always the higher of the two, and the difference between them is the spread.
Imagine EUR/USD quoted at 1.10000 / 1.10012. The first number is the bid and the second is the ask. The gap is 0.00012, which is 1.2 pips, because one pip on EUR/USD is the fourth decimal place, 0.0001. Most platforms show a fifth decimal, so prices move in tenths of a pip.
The spread exists because someone has to stand ready to buy from you and sell to you at any moment. Banks, liquidity providers and brokers earn part of their income from that gap. For you as a trader, it is the first cost of every position.
Section 2
How the spread becomes a cost
When you buy, you pay the ask. If you closed the trade a second later, you would sell at the bid, which is lower. So a brand-new buy position already shows a small loss equal to the spread. A sell works the same way in reverse: you sell at the bid and buy back at the ask.
That is why the spread is a real cost even though it never appears as a separate line on your statement. It is built into the prices you trade at. Price has to move in your favour by at least the spread before the position breaks even.
You pay the spread once per round turn, meaning once for opening and closing a position together. You do not pay it again on every tick while the trade is open.
Worked example: 1.2 pips on one standard lot of EUR/USD
- Quote: bid 1.10000, ask 1.10012, so the spread is 1.2 pips.
- One standard lot is 100,000 euros. On EUR/USD one pip is worth $10 per standard lot.
- Spread cost = 1.2 pips × $10 = $12 for the round turn.
- A buy opened at 1.10012 only breaks even once the bid rises to 1.10012.
Section 3
Fixed vs variable spreads
A variable spread, also called a floating spread, changes with market conditions. It is usually tight when many buyers and sellers are active and wider when they are not. Most brokers use variable spreads on their main accounts.
A fixed spread stays at the same level in normal conditions. The broker takes on the risk of changing market prices and usually sets the fixed level above the average variable spread to pay for that. Fixed spreads can still be widened or re-quoted in extreme conditions, so read the account terms.
Neither type is always cheaper. Variable spreads tend to cost less on average if you trade during busy hours. Fixed spreads make costs easier to predict, which some traders prefer when they trade at quieter times.
Section 4
Typical (average) vs minimum spread
Brokers often publish two kinds of figure. The minimum spread, sometimes written as "from 0.0 pips", is the tightest spread seen in the measuring period, often for a very short time. The typical or average spread is the spread you are more likely to see across a normal trading day.
For cost comparisons the average is far more useful. A pair advertised "from 0.6 pips" may average 1.0 pip or more over a day. If a broker publishes only a minimum, treat it as the best case rather than what you will normally pay.
The spreads on FXSpreadMeter are published reference figures from each broker, shown with the date they were checked. They are not live prices, so always confirm the current spread on the broker's own platform before you trade.
Section 5
What makes spreads widen
Spreads move because liquidity moves. Liquidity is the amount of buying and selling interest available at any moment. When it is deep, prices are competitive and the gap narrows. When it thins out, the gap widens.
Economic news
Around major releases, such as central bank decisions or employment data, liquidity providers pull back because prices can jump. Spreads can widen sharply for seconds or minutes before and after the release.
Daily rollover
Around the daily rollover, usually 5 pm New York time, many banks close their books for the day. For a short window, spreads on most pairs can be several times wider than usual.
Liquidity and trading sessions
Major pairs such as EUR/USD are usually tightest when the London and New York sessions overlap. Minor and exotic pairs trade less, so their spreads are wider at all times and widen further in quiet sessions. The market can also open on Monday with wider spreads after the weekend break.
Section 6
Spread in pips and in money
A spread quoted in pips only becomes a cost once you know the pip value for your trade size. For pairs where the US dollar is the second currency, such as EUR/USD or GBP/USD, one pip is worth $10 on a standard lot, $1 on a mini lot and $0.10 on a micro lot.
For other pairs, the pip value depends on the exchange rate. On USD/JPY one pip is 0.01 yen, so its dollar value per lot changes as the yen rate changes. Our pip calculator works this out for any pair and account currency.
Worked example: the same 1.2 pip spread at different trade sizes
- Standard lot (100,000): 1.2 × $10 = $12.
- Mini lot (10,000): 1.2 × $1 = $1.20.
- Micro lot (1,000): 1.2 × $0.10 = $0.12.
- Twenty standard-lot trades a month at 1.2 pips = 20 × $12 = $240 in spread alone.
Section 7
How to compare spreads between brokers
Compare like with like. Use the same pair, the same type of account and, where possible, average rather than minimum figures. A Standard account with no commission and a Raw account with a commission are priced differently, so compare their all-in cost rather than the spread alone.
- Check the average spread for the pairs you actually trade, not just EUR/USD.
- Look at when you trade: a spread that is tight in London may be wider in the Asian session.
- Add any commission to the spread before comparing accounts.
- Check the date of the figure and confirm it on the broker's platform.
Compare brokers
Compare brokers: average EUR/USD spread
Published average and minimum EUR/USD spreads for the brokers we review, lowest average first. Figures are reference values with the date they were checked, not live prices.
| Broker | Account type | Avg EUR/USD (pips) | Min EUR/USD (pips) | Checked | Visit broker |
|---|---|---|---|---|---|
| Zero | 0.03 | 0.0 | 2026-11-13 | Visit broker | |
| Razor | 0.1 | 0.0 | 2026-11-10 | Visit broker | |
| Raw | 0.16 | 0.0 | 2026-11-10 | Visit broker | |
| Raw | 0.2Average (Q1 2026, independent data) | 0.0 | 2026-09-04 | Visit broker | |
| Raw+ | 0.25 | 0.2 | 2026-11-10 | Visit broker | |
| Ultra Low | 1.1 | 0.8 | 2026-08-15 | Visit broker | |
| Standard | — | 1.3 | 2026-11-10 | Visit broker |
Published reference figures checked on the date shown, not live prices. Confirm current pricing with the broker before you trade.
Key takeaways
- The spread is the gap between the bid and ask price and is paid on every round turn.
- On EUR/USD, each pip of spread costs $10 per standard lot: a 1.2 pip spread is $12.
- Average (typical) spreads are more useful for comparisons than minimum spreads.
- Spreads widen around news, at the daily rollover and when liquidity is thin.
- Compare Raw accounts by adding their commission to the spread.
Frequently asked questions
What is a good spread in forex?
It depends on the pair and the account. On a major pair such as EUR/USD, Standard accounts often show average spreads of around one pip, while Raw accounts can average a fraction of a pip plus a commission. Compare the all-in cost for the pairs you trade rather than looking for one number.
Is the spread charged when I open or when I close a trade?
Effectively both, once: you buy at the higher ask and sell at the lower bid, so the full spread is paid across the opening and closing of the position. It is not charged again while the trade stays open.
Why does my spread look wider than the broker's advertised figure?
Advertised figures are often minimum or average spreads measured in busy hours. Around news, at rollover or in quiet sessions the live spread can be much wider. Our figures are published reference values with a check date, not live prices.
Are fixed spreads better than variable spreads?
Not automatically. Fixed spreads give predictable costs but are usually set above the average variable spread. Variable spreads are often cheaper on average during busy trading hours but can widen sharply at times.
How do I calculate the spread cost of a trade?
Multiply the spread in pips by the pip value per lot and by your number of lots. For EUR/USD, 1.2 pips × $10 × 1 lot = $12. The trading cost calculator does this for any pair and adds commission and swap.
Does a 0.0 pip spread mean trading is free?
No. Accounts that advertise spreads from 0.0 pips usually charge a separate commission, often about $3.00 to $7.00 per standard lot round turn, and the average spread is rarely zero.
Keep learning
Forex Trading Costs
Related lessons
Trading forex and CFDs involves a high risk of losing money. Leverage can work against you.
FXSpreadMeter Education
Written by: FXSpreadMeter Editorial Team
Last reviewed: 21 November 2026
This lesson is general educational information produced in-house. It is not personal advice, not a recommendation, and it has not been reviewed by an external financial adviser. Trading leveraged products carries a high level of risk to your capital.






